Draper 68294 Manual Download

Page: 1 / 21

PETROL

EARTH AUGER

KIT

68294

These instructions accompanying the product are the original instructions. This document is part of the product, keep

it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before

assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,

and contains all the necessary information to ensure its correct and safe use. By following all the general safety

instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the

product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the

product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools

policy of continuous improvement determines the right to make modifications without prior warning.



ATTENTION!:

2 stroke engines

MUST be filled with

unleaded fuel,

MIXED with 2-str

oke oil.

Failure to add oil or incorrectly mixing the oil

WILL result in running problems or

ENGINE FAILURE!

Summary of Contents for 68294






















Search results

Summary of Contents for 68294

Reviews:

Related manuals for 68294

Brands by name

Popular brands

Draper 68294, Manual

Search results

Summary of Contents for 68294

Reviews:

Related manuals for 68294

Brands by name

Popular brands