- 8 -
OPERATION AND USE Cont’d.
PARALLEL GUIDE
The parallel guide
✼✌
(Fig.6) can be fitted from
either side of the router. When the required
position is obtained the parallel guide can be
secured into place by the two locking knobs
✽✌
(Fig.7). Any fine adjustment can be made by
loosening knob
❀✌
, turning the knurled knob
✿✌
and then tightening knob
❀✌
.
DIRECTION OF CUT
When beginning to cut, insert the cutter slowly to
the selected depth and start up in a forward
motion, holding the machine with both hands.
Starting the cutter in the wrong direction could
cause the machine to ricochet, and this may lead
to damage of the work piece (Fig.8).
Fig.7
✿✌
✽✌
✽✌
Fig.8
Rotation
Rotation
Feed
Feed
❀✌
