- 15 -
9. OPERATING
INSTRUCTIONS
9.1 POWER SUPPLY
Before you connect the equipment to the power
supply make sure that the data on the rating plate is
identical to the supply voltage.
Warning!
Always remove the power
plug before making adjustments to
the equipment.
It is highly recommended that this
machine is used in conjunction
with a residual current device
(R.C.D) – Draper Stock No.69307.
9.2 SWITCHING ON – STEPS 1 – 2
1
2
9.3 CUTTING HEIGHT ADJUSTMENT
Warning!
Always disconnect the mower from
the electrical supply before making any
adjustments to the cutting height.
The front and back wheels have independently
sprung locking axles that can adjust the height
of the rotary cutting blade to three cutting
height positions.
Important!
Always check the condition of the
rotary blade before using the mower. Replace
any blunt or damaged blades.
Warning!
Always ensure the blade is at a
standstill and the power supply is disconnected
before examining the rotary blade.
– To ensure an even cut, make sure that all four wheels are set to the same position. However, in
some situations having the front wheels one notch lower than the rear wheels may produce a
better result.
