manualshive.com logo in svg

Draper 40218, Manual

Share
Download
Draper 40218 Manual Download Page 1

These instructions accompanying the product are the original instructions. This document is part of the product, 

keep it for the life of the product passing it on to any subsequent holder of the product. Read all these 

instructions before assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been 

designed, and contains all the necessary information to ensure its correct and safe use. By following all the 

general safety instructions contained in this manual, it will ensure both product and operator safety, together 

with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the 

product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper 

Tools policy of continuous improvement determines the right to make modifications without prior warning.

40218

230V SUBMERSIBLE

WATER BUTT PUMP

WITH FLOAT SWITCH

Summary of Contents for 40218





















Reviews:

No comments

Brands by name

Popular brands

Load more brands