- 7 -
ASSEMBLY
Fitting Bed Extension (WTL90 only)
Using the fixings supplied, bolt the
extension
✴✌
to the headstock end of
the bed.
OPERATION & USE
NO-VOLT ON/OFF SWITCH
Note: The WTL95 is fitted with an
additional emergency shut off cover.
In the event of an emergency, closing the
cover firmly will cause the stop button to
be triggered, thus stopping the machine. To
re-open the cover, the red button requires
sliding which in turn will release the cover
and stop button.
In the event of a power failure the machine
will have to be manually restarted.
To switch the machine on, lift up the sprung
cover and push the button marked
✲✌
.
To switch the machine off, lift up the sprung
cover and push the button marked
✔✌
.
To switch the machine off in an emergency
strike the cover
✵✌
firmly which will
trigger the
✔✌
button.
Fig.9.
CHANGING SPEED
The machine has to be running for the
speed change to move.
With the machine running, pull the lever
✶✌
away from the headstock then move it
around to the desired speed. The handle
indicates the speed. For example, Fig.10 is
set on speed 1. The Lathe should be in
speed 1 (the slowest) before turning off to
aid ease of start up.
Fig.10.
Fig.8.
Fig.9.
Fig.10.
✴✌
✶✌
✵✌
