Draper 32319 Instructions Manual Download Page 9 | Manualshive

Page: 9 / 24

background image

- 9 -

7. UNPACKING

AND

CHECKING

7.1 PACKAGING

Carefully remove the machine from the packaging and examine it for any sign of damage that may
have happened during shipping. Lay the contents out and check them against the parts shown
below. If any part is damaged or missing; please contact the Draper Helpline (the telephone
number appears on the Title page) and do not attempt to use the machine.

The packaging material should be retained at least during the guarantee period: in case the
machine needs to be returned for repair.

Warning!

Some of the packaging materials used may be harmful to children. Do not leave any of

these materials in the reach of children.

If any of the packaging is to be thrown away, make sure they are disposed of correctly; according
to local regulations.

7.2 WHAT´S IN THE BOX?

As well as the hedge trimmer, there are several parts not fitted or attached to it.

Fuel mixing bottle.

Box spanner.

Spanner.

Hexagon key (large).

Hexagon key (small).

«
...
7
8
9
10
11
...
»

Summary of Contents for 32319

























Reviews:

No comments

Related manuals for 32319

Brand: Gardena Pages: 13

Brand: Villager Pages: 108

Brand: Homelite Pages: 42

FeatherLite 530163364

Brand: Weed Eater Pages: 11

Brand: Toro Pages: 44

Brand: Parkside Pages: 122

Brand: Clas Ohlson Pages: 64

Brand: Clas Ohlson Pages: 104

Brand: HENX Pages: 92

Brand: AEG Pages: 16

FQ-AHE 4020 BASIC

Brand: Hornbach Pages: 180

Brand: Scotts Pages: 30

Brand: Draper Pages: 22

Brand: Certa Pages: 8

Brand: Power Plus Pages: 16

Brand: Kobalt Pages: 21

Brand: McCulloch Pages: 15

Brand: Ryobi Pages: 199

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands