- 16 -
- 9 -
9.4 STOPPING THE ENGINE – FIG. 24
To stop the engine, move the stop switch
to
the “stop” position.
Note:
If the blower/vac has been running at full
speed for a prolonged period allow the engine to
idle for a few minutes before stopping.
The engine must be stopped while carrying out any
other operation such as:
–
Refuelling.
– Making checks or adjustments.
– Cleaning.
9.5 ADJUSTING THE ENGINE IDLE
SPEED – FIGS. 25 – 26
Start the engine by following the steps highlighted in
the previous section:
9.2 Cold Starting the Engine.
Run the engine at idle speed until operating
temperature is reached (2 – 3 minutes).
Use the supplied screwdriver
to adjust the
engine idle speed to 2300 – 2500r/min.
Turn the idle screw
clockwise to increase
engine idle speed. Turn the idle screw
counterclockwise to decrease engine idle
speed.
Warning!
Machine tubes and intake cover must be
installed while adjusting engine idle! Engine idle
speed will also be affected if either the intake cover
or machine tubes are blocked, damaged or
incorrectly installed.
1
1
2
3
2
9. OPERATING
INSTRUCTIONS
1
Fig.24
Fig.26
Fig.25
2 – 3 mins
2300 –
2500r/min
2 – 3 mins
2
2
3
7. UNPACKING
AND
CHECKING
7.1 PACKAGING
Carefully remove the machine from the packaging and examine it for any sign of damage that may
have happened during shipping. Lay the contents out and check them against the parts shown
below. If any part is damaged or missing; please contact the Draper Helpline (the telephone
number appears on the Title page) and do not attempt to use the machine.
The packaging material should be retained at least during the guarantee period: in case the
machine needs to be returned for repair.
Warning!
Some of the packaging materials used may be harmful to children. Do not leave any of
these materials in the reach of children.
If any of the packaging is to be thrown away, make sure they are disposed of correctly; according
to local regulations.
7.2 WHAT´S IN THE BOX?
As well as the blower vac, there are several parts not fitted or attached to it.
Petrol
motor
unit.
Blower
nozzle.
Blower
tube.
Carry
strap.
Collection bag
intake
tube.
Vacuum tube.
Vacuum nozzle.
Collection bag.
Fuel mixing bottle.
Screwdriver.
Large hex. key.
Small hex. key.
Box spanner.
M5 × 10 Screw × 3.
