– 14 –
9. OPERATION
9.4 THERMAL OVERLOAD PROTECTOR
Caution: This compressor is equipped with an automatic reset thermal overload protector, which
will shut off the motor if it becomes overheated.
If thermal overload protector shuts motor OFF frequently, look for the following causes.
– Low voltage.
– Clogged air filter.
– Lack of proper ventilation.
Caution: If the thermal overload protector is actuated, the motor must be allowed to cool down
before start-up is possible. The motor will automatically restart without warning if left plugged into
electrical outlet and unit is turned on.
9.5 STORAGE
– When not in use, store hose and compressor in a cool dry place.
– Drain tank of moisture.
– Disconnect hose and hang open ends down to allow any moisture to drain.
