background image

3. GUARANTEE

3.1 GUARANTEE

Draper tools have been carefully tested and inspected before shipment and are guaranteed to be 

free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or 

contact:

Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England. 
Telephone Sales Desk: (023) 8049 4333

 or: 

Product Helpline (023) 8049 4344.

A proof of purchase must be provided.
If upon inspection it is found that the fault occurring is due to defective materials or workmanship, 

repairs will be carried out free of charge. This guarantee period covering parts/labour is 12 months 

from the date of purchase except where tools are hired out when the guarantee period is 90 days 

from the date of purchase. The guarantee is extended to 24 months for parts only. This guarantee 

does not apply to normal wear and tear, nor does it cover any damage caused by misuse, careless 

or unsafe handling, alterations, accidents, or repairs attempted or made by any personnel other 

than the authorised Draper warranty repair agent.
Note: If the tool is found not to be within the terms of warranty, repairs and carriage charges will be 

quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its 

terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or 

invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.

Draper Tools Limited.

11.  EXPLANATION OF SYMBOLS

Do not dispose of WEEE*
unsorted municipal waste.

Class II construction
(Double insulated).

11.1 EXPLANATION OF SYMBOLS

- 4 -

- 17 -

Summary of Contents for 09113





















Reviews: