Dramm MS75E Owner'S/Operator'S Manual Download Page 17 | Manualshive

Page: 17 / 25

Dramm MS75E Owner'S/Operator'S Manual Download Page 17

English

16

Oil feeding and mixing

Oil feeding

・

Make sure you use Fuel and oil mixture

Gasoline

:

exclusive oil

50

:

1

Use exclusive oil for two-cycle air cooled engines.

Neither overfill nor spill the fuel on to the engine.

DANGER

There is a possibility of fuel igniting. Make sure

you observe the following items.

・

When filling fuel, stop the engine and

ensure no source of fire such as cigarette is

close to the area.

・

Don't spill fuel. If fuel is spilled, wipe it all off

at once and start the engine after it is dry.

・

Don't fill fuel above the standard line. There

is the possibility of leakage.

・

When a fuel leakage is found, use the

engine after repairs are done.

・

After filling fuel, make sure you close the

fuel tank cap.

・

If operating the machine with gasoline

alone, the engine will seize.

Make sure to mix exclusive two-cycle engine

oil in the specified quantity.

・

The mixing ratio shall be the designated

ratio for exclusive two-cycle engine oil.

・

Use lead-free gasoline for automobiles for

fuel.

CAUTION

«
...
15
16
17
18
19
...
»

Summary of Contents for MS75E


























Reviews:

No comments