Dramm MS75E Owner'S/Operator'S Manual Download Page 16 | Manualshive

Page: 16 / 25

Dramm MS75E Owner'S/Operator'S Manual Download Page 16

English

15

3. Handling and operating method

Preparations for starting

1) Check that screws of equipment are not loose.
2) Connect hoses to pump as shown below. Connect discharge hose first, then bypass hose, and then

intake hose. Then connect discharge hose to applicator (spray gun, spray wand, etc.).

3) Remove the nozzle handle to disable spraying.

WARNING

Gasoline is highly flammable and explosive. You can be burned or seri-ouslyinjured
when handiing fuel. Stop the engine and keep heat, sparks, and flame away.
Handle fuel only outdoors. Wipe up spills immediately.

4) Before starting, make sure the pickup or intake

hose is submerged in water. The water
provides lubrication for the pump and will
prevent damage to the pump.

5) Tie the water intake hose and bypass hose

together with a band so that they will not pop
out of the chemical liquid tank during
operation.

Intake

Bypass

Chemical liquid tank

Intake hose

Bypass hose

Dischage hose

«
...
14
15
16
17
18
...
»

Summary of Contents for MS75E


























Reviews:

No comments