Draminski GMS, Instruction Manual

Page: 24 / 48

23
EN
g) after a few seconds you will hear 2 short sound
signals informing that the measuring has finished,
the screen will show moisture result in % and tem-
perature of the sample (in °C or °F depending on
settings), e.g.:
GMS
temp: 23.9 °C
8.8%
Canola
Moisture measurement result is presented taking
into consideration correction for temperature (au-
tomatic temperature compensation).
h) when the measuring has finished, you should
remove the knob from the measuring chamber
using the ratchet wrench (use the switch of direc-
tion), then empty and clean the grinding device
and the knob with the help of the plastic brushes.
When the measuring chamber is clean, the device
is ready for further operation. In order to measure
another sample of the same species, grind the
grain again and then start measuring with
button, or using button to go back to the list
and choose another species;
NOTE! Proper clearing of the measuring chamber
is required when you change the type of grain and
when the samples have different or increased hu-
midity.
i) the final result should be an average of at least 3
measurements. The GMS automatically calculates
the average and shows it in the bottom right cor-
ner of the screen, for example:
GMS
temp: 23.9 °C
8.8%
Canola
avg: 8.9%
The number of measurements from which the
average value is calculated can be changed in the
main menu (see section: SETTINGS).
SECTION 6 | MEASUREMENTS