14
15
UNIT INSTALLATION
Cut the fastener
Gypsum
Board
Wall Stud
Wooden
panel
1) MOUNTING THE UNIT ON THE WALL
• Undo the fastener securing the wall bracket and base at the
back of the unit with cutting pliers.
• For a installation directly on a wall stud, screw three (3) screws in
the middle area only.
• If the wall is covered with gypsum
board, we recommend installing a
wooden panel screwed to the wall studs
beforehand for more stability. Then,
screw the bracket to the wall with the
five (5) screws supplied with the unit.
UNIT INSTALLATION
2) CONNECTING THE
DUST INLET
Connect the dust inlet onto the unit
securing it with a collar (do not glue).
• Lift the head to slide its support onto the wall bracket.
Suggested distance
from the floor:
50” (125 cm)
