12
13
UNIT INSTALLATION
2) CONNECTING THE
DUST INLET
• Connect the dust inlet onto the unit
securing it with a collar (do not glue).
• Lift the head to slide its support onto the wall bracket.
UNIT INSTALLATION
Gypsum
Board
Cut the fastener
Wall Stud
Wooden
panel
1) MOUNTING THE UNIT ON THE WALL
• Undo the fastener securing the wall bracket and base at the
back of the unit with cutting pliers.
For a installation directly on a wall stud, screw three (3) screws in the
middle area only.
If the wall is covered with gypsum board,
we recommend installing a wooden panel
screwed to the wall studs beforehand for
more stability. Then, screw the bracket to
the wall with the five (5) screws supplied
with the unit.
Suggested distance
from the floor:
50” (125 cm)
