background image

7

MODELS

HP

H

2

O

CFM

DECIBELS

AMPS

CAPACITY

SIZE in/cm

2AC9922-CT

2.34

160

105

63

14.5 (108V - 120V)

9 gal. / 41 L

15 dia. x 28 /

38 dia. x 70

2AC9932-CT

4

170

135

69

13 (220V - 240V)

You have purchased one of the 
following models. Identify the 
one to related to it.

The model number appears on 
the technical label stuck on the 
left side of the unit.

TECHNICAL SPECIFICATIONS

We wish to thank you for your trust and congratulate you for having chosen a Drainvac 
product. It is a sound investment that will satisfy your vacuuming needs for years to 
come. Drainvac’s central vacuum cleaners are manufactured and checked at our factory 
by our qualified staff who have been specifically trained to this end. A number of 
installations and operating methods must be followed to ensure your system’s maximum 
performance and to avoid unnecessary service calls. Please read this manual carefully.

First off, we recommend you to fill out 
this form before you start the installation 
process. If you have any concerns or 
problems you may encounter, please 
contact the nearest retailer. The unit’s 
profile will be required.

To fill in the Drainvac product registration form, go to
www.drainvac.com/client-support/register-your-drainvac

Model* :

Serial  number* :

Retailer  name :

Date of purchase :

Date of the last maintenance :

INTRODUCTION

REGISTRATION

*This information is found on a metal tag located on the left side of the unit.

Metal tag

Central Vacuums

Summary of Contents for 2AC9922-CT
















Reviews: