DragonEye Compact Speed LIDAR Operator Manual
16
DragonEye Technology, LLC |Doc. 30666 Rev. 03
Selecting Speed Mode
The LIDAR will normally power up in “Speed” mode, unless it was
recently used in a different mode. If “Speed” mode is not displayed
on power up, simply press
until the side panel displays:
Using the HUD Sighting System
The Head-Up display provides a precision aiming reticle, speed
reading, and other status information. To find the sighting reticle,
press and release the trigger to wake up the LIDAR and look directly
through the HUD letting your eyes focus on a target well in front of
the LIDAR unit. If you haven’t used a HUD device before, it might
take a minute or two for your eyes to adjust the first time.
(N
ote: Make sure the LIDAR’s brightness setting is on medium or high
if working in daylight.)
The LIDAR’s laser beam is invisible, but will be contained within the
split oval aiming reticle. This is your aim point for target vehicles.
MODE
ENTER
km/h
M
HUD Aiming
Reticle
