Ultrasonic Flaw Detector DFD30
19
5.8.1 WELD
There are several types of weld detection stored in the main unit, such as Type I, Type V, Type U and Type X. Take
Type I as an example, weld width, weld distance show on the display. Users could make change according to different
condition.
5.8.2 W WIDTH
This feature offers users to set the width of weld.
5.8.3 W DIST
This feature offers users to set the distance of weld to the surface.
5.9 SET
Under A-Scan mode, press left or right direction key to set
SET
.
5.9.1 HORN
This menu is used to set HORN on or off.
Under menu of SET, press up or down key to choose HORN, press + or – key to make change.
5.9.2 BRIGHT
This menu is convenient for users operate in dark or sunlight places. So, it offers two modes: Low and High.
Under menu of SET, press up or down key to choose BRIGHT, press + or – key to make change.
