www.dragino.com
LoRaWAN Door Sensor User Manual
22 / 24
6.
Use AT Command
6.1
Access AT Command
LDS02 supports AT Command set. User can use a USB to TTL adapter to configure LDS02 via use
AT command, as below.
USB to TTL <- -> LDS02
RX <- -> TX
TX <- -> RX
GND <- -> GND
In PC, User needs to set
serial tool
(such as
, SecureCRT) baud rate to
115200
to access to
access serial console of LDS02. Below is the output for reference:
The AT Access password is
123456
.
Each AT Command need to
add an ENTER
at the end before send.
