Dräger MQG 0020, Instructions For Use Manual

Page: 15 / 288

Dräger X-am 5100 15
For Your Safety
1 For Your Safety

Before using this product, carefully read these Instructions for Use
and those of the associated products.

Strictly follow the Instructions for Use. The user must fully
understand and strictly observe the instructions. Use the product
only for the purposes specified in the Intended use section of this
document.

Do not dispose of the Instructions for Use. Ensure that they are
retained and appropriately used by the product user.

Only trained and competent users are permitted to use this
product.

Comply with all local and national rules and regulations associated
with this product.

Only trained and competent personnel are permitted to inspect,
repair and service the product as detailed in these Instructions for
Use (see chapter 6 on page 26). Further maintenance work that is
not detailed in these Instructions for Use must only be carried out
by Dräger or personnel qualified by Dräger. Dräger recommend
a Dräger service contract for all maintenance activities.

Use only genuine Dräger spare parts and accessories, or the
proper functioning of the product may be impaired.

Do not use a faulty or incomplete product. Do not modify the
product.

Notify Dräger in the event of any component fault or failure.
Safe coupling with electrical devices
Electrical connections to devices which are not listed in these
Instructions for Use should only be made following consultation with
the respective manufacturers or an expert.
Use in areas subject to explosion hazards
Devices or components for use in explosion-hazard areas which have
been tested and approved according to national, European or
international Explosion Protection Regulations may only be used
under the conditions specified in the approval and with consideration
of the relevant legal regulations. The devices or components may not
be modified in any manner. The use of faulty or incomplete parts is
forbidden. The appropriate regulations must be observed at all times
when carrying out repairs on these devices or components.
1.1 Definitions of alert icons
The following alert icons are used in this document to provide and
highlight areas of the associated text that require a greater awareness
by the user. A definition of the meaning of each icon is as follows:
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, could result in physical injury, or damage to the
product or environment. It may also be used to alert against
unsafe practices.
NOTICE
Indicates additional information on how to use the product.
!
!
i i