31
Maintenance
Recommended maintenance intervals
Recheck for functionality and leakages after servicing
and/or replacing components.
Replacing the battery of the timer
Disconnect the timer from the
test device (attached with a
Velcro strip).
Open the battery compart-
ment:
Use the suitable screwdriver or
coin, turn in a counterclock-
wise direction and remove the cover.
Remove the old battery and insert the new battery.
Ensure the correct polarity, "+" must face upwards.
Close the battery compartment:
Attach the cover and close it using the suitable screw-
driver or coin.
Attach the timer with the Velcro strip to the test device.
Work to be carried out
Before each
series of
test
s
Af
ter ea
ch
series of
test
s
Every ye
ar
Perform self test
X
Clean test device
X
Functional check and leak test
X
Check accuracy of manometer
X
1)
1)
Carried out by Dräger
Calibrate high, medium and low
pressure sensors
X
1)
Fully overhaul high pressure com-
ponents
X
1)
0172
10
75.eps
Disposal
EU-wide regulations for the disposal of
electric and electronic appliances
which have been defined in the EU
Directive 2002/96/EC and in national
laws are effective from August 2005
and apply to this device. Common
household appliances can be dis-
posed of using special collecting and
recycling facilities.
However, as this device has not been registered for
household usage, it must not be disposed of through
these means. The device can be returned to your national
Dräger Sales Organization for disposal. Please do not
hesitate to contact the above if you have any further
questions on this issue.
Troubleshooting
Fault
Cause
Remedy
Test head looses
air
Test head leaky
Retighten con-
nector clamp
Check hose con-
nections
Positive pres-
sure in mask
Mouth nozzle on
test head leaky
Send for repair to
Dräger
Test pressure not
reached
Supply pressure
too low
Check supply
pressure; fill cyl-
inder as required
Adaptor incorrect
or leaky
Check
Timer not work-
ing
Battery empty
Replace battery
