Dräger Medical JM-103, Operating Instructions Manual

Page: 39 / 92

DRAFT 20 June 2005
Jaundice Meter (Model JM-103) User Manual (usr070) Page 5 - 3
NOTE:
Only use the sternum location for JM-103
measurements when the device is used in a
doctor’s office.
b. Push the measuring probe gently
until a click sounds. The
instrument’s xenon lamp flashes
momentarily, and the measured
value appears on the display.
c. If the measured value is outside the
measurement range of 20 mg/dL or
340
µ
mol/L, the display shows “---”
and user should contact the
physician.
NOTE:
If the instrument is not operated for more than 60 seconds, the backlight
on the display goes out.
7. To take another measurement, press
the Reset button, and continue from step 4.
8. To stop measuring, perform the following:
a. Set the Power switch to the Off position.
b. Using medicinal alcohol, clean the measuring probe.
c. Place the Jaundice Meter on the charger unit. When the
Jaundice Meter is not in use, keep it on the charger unit.