DR SPRINT PRO, Safety & Operating Instructions Manual, Page: 21 / 52

CONTACT US AT
www.DRpower.com
21
Tool needed:

3/8" Wrench
1. Remove the screws on either side of the Stone Guard and drop it from the
Frame (
Figure 32 ).
Tip:
Keep the screws together with the Stone Guard.
Removing and Replacing Section:
Bottom Shield - SPRINT

and PRO Models
NOTE: You do not need to remove the Side Shield or any of its hardware when
removing the Bottom Shield.
Tool needed:

7/16" Wrench
1. Remove the Mow-Ball™ Support Assembly. See “Removing the Mow-Ball™
Support Assembly” on page 19.
2. Remove the Stone Guard Flap. See “Removing the Stone Guard Flap”
above.
3. Remove the two mounting Bolts and Washers at the rear of the Frame
(
Figure 33 ).
4. Remove the third mounting Bolt and Washer from the front of the Frame on
the outer edge near the Bearing Housing.
5. Slide the Bottom Shield out from under the lip of the Side Shield and remove
it.
6. When reinstalling the Bottom Shield, be sure to tuck it under the lip of the Side Shield first, then finish positioning it and
install the mounting hardware.
7. Reinstall the Stone Guard Flap in the reverse order that you removed it in the previous section.
Bottom Shield – PRO-XL SELF-PROPELLED Model
Tools needed:

7/16" Wrench

3/8" Wrench
NOTE: You do not need to remove the Side Shield or any of its hardware when removing the Bottom Shield.
1. Remove the Mow-Ball™ Support Assembly. See “Removing the Mow-Ball™ Support Assembly” on page 19.
2. Remove the two (2) mounting Bolts and Washers at the rear of the Frame and the single mounting Bolt and Washer near the
center using a 7/16" Wrench or Socket (
Figure 33 ).
Before performing any maintenance procedure or inspection, stop the engine, wait five (5) minutes to allow all parts to cool.
Disconnect the spark plug wire, keeping it away from the spark plug.
Before performing any maintenance procedure or inspection, stop the engine, wait five (5) minutes to allow all parts to cool.
Disconnect the spark plug wire, keeping it away from the spark plug.
Figure 32
Remove Screws
Remove Screws
Figure 33