CONTACT US AT
www.DRpower.com
11
USB Port
Figure 15
2.
Place the Corner Tabs of the Bagger Assembly onto the Rear Cover Brackets
on both sides (
Figure 12
).
3.
Lower the Rear Cover onto the Bagger Assembly. Make sure the Cover aligns
correctly and fits fully into the grooves of the Bagger Assembly.
Mulching Setup
Setting up the Mower for Mulching allows the material to remain under the
Deck longer so it can be chopped into smaller pieces. This will allow the
material to return to the lawn and decompose faster.
1.
Open the Rear Cover and insert the Mulching Plug (
Figure 13
).
Starting the Blade
1.
Hold the Self-Locking Button down with one hand as you pull the Blade
Engage Wire Trigger to the Handlebar with the other hand (
Figure 14
).
2.
Release the Self-Locking Button while still holding the Blade Engage Wire
Trigger to the Handlebar to keep the Blade spinning.
Stopping the Blade
1.
Release the Blade Engage Wire Trigger to stop the Motor/Blade (
Figure 14
).
Additional features
USB Charge Ports
The Battery can be used to charge/operate phones or other electronic devices
that use a USB cord.
2.
Remove the Battery from the tool.
3.
Plug the device into one of the USB Ports of the Battery (
Figure 15
).
Blade Engage
Wire Trigger
Figure 14
Self-Locking
Button
Mulching
Plug
Figure 13
Figure 12
Bagger
Assembly
Bagger
Handle
Rear Cover
Bagger
Tab
Rear Cover Bracket
Always be aware that the blade is cutting (spinning) while Motor is running.
The blade is sharp; contacting the blade can result in serious personal injury.
