15
DR POWERWAGON 5.0 Safety & Operating Instructions
Dumping
Note:
For safety reasons, the DR POWERWAGON 5.0 bed is designed NOT to dump
automatically once the dump lever is released. You must pull the dump lever back then lift
the back of the bed to cause it to tip forward.
1.
Pull the handle on the dump lever
straight out
(
Figure 9
), then pull up
on the bed handle to dump the
load
(
Figure 10
).
2.
After unloading, push the bed
back down into place by hand.
Note:
The bed of the DR
POWERWAGON 5.0 is balanced so
you can dump the load with minimal
effort. If you are carrying a very heavy
load, you may not be able to lift the
bed to dump it when you release the
latch lever. In this case, you will need
to manually remove part of the load
from the back of the bed, until the
load is light enough to allow the bed
to tip forward when you lift the bed
handle.
Figure 9
Figure 10
Pull lever to
release dump bed
Bed Handle
Important!
Be sure the dump lever latches securely.
