6
DR
®
TRIMMER/MOWER™ BEAVER BLADE
®
3.
Choose the package with the hardened mounting bolt, metal spacer and illustration appropriate for
your machine
(Figure 1)
.
4.
Mount the BEAVER BLADE as shown in
Figure 1
. Use the hardened mounting bolt supplied with the
BEAVER BLADE kit. Insert the hardened mounting bolt through the aluminum Mow Ball Support,
the BEAVER BLADE
(with the printed side of the blade facing up)
, the metal spacer (with the beveled
side up), the bearing housing plate (if it’s a later model) and then into the bearing housing. Use a
Phillips head screwdriver or the head locking tool to keep the shaft from turning while tightening the
BEAVER BLADE and Mow-Ball™ Support as described in your DR TRIMMER/MOWER
Safety &
Operating Instructions
. Tighten the hardened mounting bolt firmly.
Figure 1
Standard, Pro & Commercial models
Kit number 131151
Sprint© 2000 Model
Kit number 146011
Summary of Contents for DR TRIMMER/MOWERTM BEAVER BLADE
Page 4: ...IV DR TRIMMER MOWER BEAVER BLADE...
Page 16: ......
