CONTACT US AT
www.DRpower.com
17
If the machine gets hung up
1.
Disengage the Blade. Do not try to free the machine from stumps or debris with the Blade engaged.
2.
Push down on the Handlebars to lift the Mowing Deck over the obstacle.
3.
Shift the machine in reverse and try backing away from the obstacle.
Cutting Brush and Saplings
1.
When cutting woody material, small saplings, etc., allow the machine to ride up and over material slowly. Adjust your forward
speed to varying conditions.
2.
After cutting brush, etc., you may want to mow over it again to remove any remaining branches. It works best to mow from
the trunk end toward the top as brush lies on the ground.
Cold Weather Operation
At temperatures below 30°F and a high dew point, the DR FIELD and BRUSH MOWER Engine may experience icing of the
carburetor and/or the crankcase breather system. DR Power Equipment offers an optional Engine cover to prevent icing in these
weather conditions. You can purchase the cover through DR Power Equipment by visiting our website at www.DRpower.com.
Please have your DR FIELD and BRUSH MOWER Model# and Serial# at hand when the call is placed.
If you need to leave the operating position to clear debris from the deck, stop the engine, wait five minutes to allow all parts to
cool. Disconnect the spark plug wire(s), keeping it away from the spark plug(s).
Summary of Contents for 10.5HP PRO-26
