Note: If the bottom electrode is removed within the space of three seconds after the
measurement starts, the measurement will be displayed as EE.
5.3 Common Wrong Operations
Please avoid the following operations:
Press the lower electrode until you hear or feel a click.
Important: Do not press the device too firmly against your skin.
1.
The device will start beeping (if the beep is enabled) and the number
indicator will flash for a few seconds. This indicates that the
measurement is about to begin.
2.
The measurement is completed, and the results are displayed at the
end of the 30-second countdown.
12
13
Measurement
Method C
“left hand - right hand”
(approximately corresponds to “lead 1)
Place your right index finger on the two upper
electrodes on the device.
Place a finger of your left hand on the lower
electrode.
CAUTION
Please note that there must be no skin contact between your right and left hand
(measurement method C) or hand and chest (measurement methods A/B). Otherwise, the
measurement cannot be taken correctly. Do not move during the measurement, do not
speak and hold the device still. Movements of any kind will falsify the measurements.
Finger not touching the electrodes
tight enough.
Measuring over/through
clothing.
Holding Dr Trust
Portable ECG Smart Connect
in the wrong direction.
Holding Dr Trust
Portable ECG Smart Connect
with left hand.
