- 10 -
Canceling the Temperature Alarm While Sounding
a. When a set weather alarm condition has been activated, that particular alarm will
sound and flash for 120 second. Press any key to mute the alarm. When weather
alarm condition was activated again within 10 minutes, alarm will not sound but will
continue to flash until weather conditions have become more steady. This feature is
useful to avoid repeated triggering for the same alarm value.
b. The alarm will reactivate automatically once the value has fallen below the set value,
or if a new value is entered.
The outdoor weather alarm
When a set outdoor weather alarm has been triggered, it will flash on the LCD display
and the general outdoor alarm icon and high/low alarm icon will flash accordingly. For
example in outdoor temperature display mode, when dew point high alarm is triggered,
DEW POINT icon will flash along with general outdoor alarm icon and high alarm icon
flashing, telling that the current alarm source is from dew point.
5.4 Min/Max Mode
-
While in Normal Mode, press the MIN/MAX key to enter the maximum mode, MAX
logo and the general Max record will be displayed.
-
Press MIN/MAX key again to enter the minimum mode, MIN icon and minimum
record will be displayed
-
Press
MIN/MAX key again to return the Normal Mode
-
In the maximum reading Mode, press the + key to display the following maximum
values together with the time and date time stamp at which these values were
recorded, if press SET key for 2 seconds in the following individual maximum
value will be reset to current reading:
1. Indoor humidity maximum
2. Indoor temperature maximum
3. Outdoor humidity maximum
4. Outdoor temperature maximum
5. Outdoor dewpoint maximum
6. Pressure maximum
Summary of Contents for WH1170
Page 12: ... 12 ...
