DR Power Equipment RapidFire Pro, Safety & Operating Instructions Manual, Page: 9 / 32

CONTACT US AT
www.DRpower.com
9
4. Install the Tow Bar to the end of the Beam with four 3/8-16 X 2.5 Bolts and
Lock Nuts (from the product package) using two 9/16" Wrenches (
Figure
4
).
5. Pull the Hitch Clip and Clevis Pin from the Leg and fold it to the down
position. Align the holes and secure the Leg with the Clevis Pin and Hitch
Clip (
Figure 5 ).
6. Remove the Jack Stand and lower the Splitter onto the Support Leg.
7. Install the front Cradle Bracket to the end of the Beam with four Bolts and
Locknuts (from the cradle package) using two 9/16" Wrenches (
Figure 6
).
8. For easier alignment in the following step, slightly loosen the Side Bracket
Hardware using a 9/16" Wrench (
Figure 7
).
9. Install the Cradles to the front and side Brackets using three Carriage Bolts
and Locknuts for each Cradle. Tighten all Cradle and Bracket hardware
using a 9/16" Wrench.
Installing the Tray Kit
Note: The following Tray Kit instructions only apply if you have purchased a
Tray Kit. If you did not purchase the Tray Kit, you have already installed the
Cradles as described in the previous section and can now continue to the
“Adding Oil and Gasoline” section on the next page.
Parts Supplied in Tray Kit ( Figure 8 ):
Item # Part # Description Qty
1 ............. 313631 ............ Table, Log (not shown) ......................... 1
2 ............. 321041 ............ Bolt, Carriage, 3/8-16 X 1", GR5, ZP ..... 4
3 ............. 333331 ............ Nut, Nylon Lock, Flanged, 3/8-16 ......... 4
4 ............. 150431 ............ Bolt, HHCS, 3/8-16 X 1-1/4", GR5 ........ 4
5 ............. 112411 ............ Washer, Flat, 5/16", USS, ZP ................ 4
6 ............. 180811 ............ Washer, Lock, 3/8" ................................ 4
Compare the contents of the Tray Kit with the “Parts Supplied” list above. If you
have any questions please contact us at www.DRpower.com or call 1-800-DR-
OWNER (376-9637) for assistance.
Cradles
Figure 7
Carriage Bolts
and Locknuts
Side
Bracket
Hitch Clip
and Clevis Pin
Figure 5
Support
Leg
Front Cradle
Bracket
Figure 6
Bolts and
Locknuts
4
Figure 8
3
2
5
6
Tow Bar
Figure 4
Bolts and
Lock Nuts