Mach M2
Dr. Mach
Lamps and Engineering
•
Loosen the six
screws 18
and remove them.
•
Lift the
filter disk 17
off the six
retainers 16
.
Always place the filter disk on a soft, non-
scratching base to preserve its surface.
•
Remove the six
retainers 16
.
•
Remove the r
ing 20
.
•
Remove the
splinter protection disk 19
.
Always place the splinter protection disk on
a soft, non-scratching base to preserve its
surface.
•
Mount the new
splinter protection disk 19
.
ATTENTION: Only use splinter protection
disks, that have been cleaned properly
(see
chapter 3.2)
.
•
Mount the r
ing 20
, the
retainers 16
and the
filter disk 17
in reverse order and fix the six re-
tainers with the
screws 18
.
18
17
16
20
19
•
Mount the
retaining ring 10
in reverse order
(anticlockwise rotation).
For mounting position the
retaining ring 10
so
that the
toothed wheel segment 14
of the ring
and the
toothed wheel 7
in the lower housing
part work into each other.
•
Fix the retaining ring by turning the
screw 9
clockwise.
14
10
9
15
59120001
Edition 04
07.03.2005 / Bak page 16/22
