Dr. Kern excellent 24/1, Manual

Page: 26 / 28

26
english
Fig. 41
Fig. 42
Modification to coin box operation
For this procedure 2 persons are needed.
l If the coinbox is not connected yet, separate the
appliance completely from power supply.
l During one person keeps pushing simultaneously the
up and down button at the timer, the other person is
connecting the appliance to power supply again.
l If the coinbox is already connected, the appliance must
not be separated from the power supply.
In this case follow the instructions below:
- one person keeps pushing simultaneously the up
and down button at the timer.
- the other person starts running the coin box by
throwing in a coin
l Keep pushing the up and down button as long as „0“
appears on the timer display (fig. 41).
The appliance is now coin box operated.
After release by the coin box the timer is going from „0“
minutes upwards.
The appliance can be started and stopped.
The up and down buttons are locked. The other buttons
keep their function.
When the time is over, the appliance is completely
switched off and the timer display expires.
Attention: The fan delay has to be executed by the coin
box!
Resetting to timer operation
The resetting is only possible, if the coinbox is separated
and the wire jumper „L1-Time“ is mounted (see
connection diagram on fig. 40).
For this procedure 2 persons are needed.
l Separate the appliance completely from power supply.
l During one person keeps pushing simultaneously the
face tanner and body fan button at the timer, the other
person is connecting the appliance to power supply
again.
l Keep pushing the face tanner and body fan button
as long as „88“ appears on the timer display (fig. 42).
l Afterwards the display expires.
The appliance is now timer operated.