DPtech FW1000 Series Firewall Products User Configuration Guide
2-26
Figure2-24
Login parameter settings
Table2-9 describes the details of login parameter settings.
Table2-9
Login parameter settings
Item
Description
Idle timeout
Set the idle timeout for the current administrator.
If an administrator did not perform any operations in that time, the administrator will
be quit by the system forcedly.
Login lock settings
If you type in error password for the administrator for consecutive times, the
administrator will be locked.
Unlock time
Set the time that the administrator has been locked.
Lock: means the specific time that you have designated for the
administrator to be locked. When the time is arrived, this administrator can be unlocked
automatically.
Permanent: If an administrator has been locked, this administrator
unable to unlock by itself. Only if an administrator with system permission configuration can
modify the locked administrator status in the “Administrator setting” column.
Password strength settings
Allows you to select the password strength, including high, medium and low.
The group to which a
remote
authentication
user belongs
Allows you to select a configuration to which a remote authentication user belongs,
includes:
Super
System configuration
Business configuration
Log configuration
Manage center configuration
Remote
authentication
user rights
Configure remote authentication user right. The range is from 1 to 5, 1 is the highest
level.
