DPtech FW1000 Series Firewall Products User Configuration Guide
3-78
To enter the equal-cost route page, you can choose
Basic> Network > IPv4 unicast routing > Equal-cost route
load balancing
from navigation tree
,
as shown in Figure3-42.
Figure3-42
Equal-cost route
3.10.4 BGP
3.10.4.1 Introduction to BGP
Border Gateway Protocol (BGP) is a kind of dynamic routing protocol used for autonomous systems (AS).
Autonomous systems have the same routing policy, running at a series of routes under the same technology
management department.
There are three early BGP versions, BGP-1 (RFC1105), BGP-2 (RFC1163) and BGP-3 (RFC1267). The current
version in use is BGP-4 (RFC 4271), which is the defacto Internet exterior gateway protocol used between ISPs.
3.10.4.2 Configure BGP
To enter the configure BGP page, you can choose
Basic> Network > IPv4 unicast routing > BGP
from navigation
tree, as shown in Figure3-43.
Figure3-43
Configure BGP
Table3-9 describes the configuration items of the BGP neighbor configuration.
Table3-10
BGP neighbor configuration
Item
Description
Neighbor IP
Configure the IP address of BGP neighbor.
