25
The charging connection is according to EN 144-2 Compressed Air Cylinder Valves
–
Maximum filling pressure 200 bar for
Sekur Navy Cap 10 e Sekur Navy Cap 15 models
and 300 bar for Sekur Navy Cap 15C
. In addition it’s remarkable that SEKUR NAVY CAP
complies with Directive 2014/68/UE, and therefore cylinders of this respirator must be
submitted to periodic inspections/tests according to the applicable National Laws.
The equipment is CE Approved and consequently CE Marked on the basis of the EC Type
Examination Certificate issued by the Notified Body ITALCERT according to PPE
Directives and MED Directives, Module B. Production surveillance of the PPE according
to Regulation 2016/425, module D is carried out by ITALCERT, Viale Sarca 336 Milano
(Italia), Notified body no. 0426, who is also carrying out the production surveillance
according to the Module D of the EC Directive 2014/90/EU.
Italcert is also carrying out the production surveillance according to the Module D of
EC Directive 2014/68/UE.
This manual has been assessed in its ITALIAN version by the Test House.
Translations in the other languages acceptable by other countries, where this product
is sold, are done under the responsibility of D.P.I.
Manufacturer
SEKUR NAVY CAP is manufactured by:
Dispositivi Protezione Individuale D.P.I. srl
Via di Cervara 42
00155 ROME
ITALY
3.
Description and intended use
SEKUR NAVY CAP is a compressed air constant flow escape respirator, available in 10
minute,
Sekur Navy Cap 10,
or 15 minute nominal duration versions (
Sekur Navy Cap
15 and Sekur Navy Cap 15C
.
Summary of Contents for 4342.8225
