CRITERIAS
LEFT, CENTER & RIGHT
LEFT SURROUND & RIGHT SURROUND
LFE
UNIT
Directional characteristics
Principle of operation
Cartridge type
Frequency range
Sensitivity, nominal ±3 dB at 1 kHz
Equivalent noise level, A-weighted
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)
Total Harmonic Distortion (THD)
Dynamic range
Max. SPL, peak before clipping
Output impedance
Cable drive capability
Output balance principle
Common Mode Rejection Ratio (CMRR)
Power supply
Current consumption
Connector
Color
Dimensions
Weight
[LxWxH]
Capsule diameter
Cable (length/color/diameter/connector)
Maximum output voltage
Polarity
For L/R og LS/RS
Directional
Directional
3 / 2 / 1
DiPMic™ (Pressure, with interference tube)
and separation baffles
Pressure, with separation baffles
Electronically derived
from L + R
Pre-polarized condenser element
Pre-polarized condenser element
20 Hz - 20 kHz
200 Hz-16 kHz (±3 dB)
20 Hz - 20 kHz
100 Hz-12 kHz (±3 dB)
20 Hz - 120 Hz (±3 dB)
26 mV/Pa
28 mV/Pa
Typ. 18 dB(A) (max. 21 dB(A))
Typ. 20 dB(A) (max. 23 dB(A))
Typ. 76 dB(A)
Typ. 74 dB(A)
<1% up to 123 dB
<1% up to 123 dB
103 dB
103 dB
100 dB
132 dB
132 dB
50 Ohm
50 Ohm
50 Ohm
100 m (328 ft)
100 m (328 ft)
100 m (328 ft)
Active signal balanced
60 dB, 50 Hz - 20 kHz
60 dB, 50 Hz - 20 kHz
60 dB, 50 Hz - 20 kHz
Phantom power P48
Typ. 5 mA (max. 5.5 mA)
Typ. 5 mA (max. 5.5 mA)
Typ. 5 mA (max. 5.5 mA)
Lemo multipin
Black
530 g (18.7 oz)
195/240/140 mm (7.7/9.4/5.5 in)
5.4 mm (0.2 in)
5.4 mm (0.2 in)
5 m (16.4 ft)/black/9.3 mm (0.4 in)/XLR
1.8 Vrms/2.5 Vpeak
1.8 Vrms/2.5 Vpeak
1 Vrms/1.4 Vpeak
Positive
Positive
Positive
All 3 microphones are factory selected to the
unit typical within 1 dB.
Both microphones are factory selected to the
unit typical within 1 dB.
Matching front/back
(frequency response and sensitivity)
Specifications & Graphs for DPA 5100
7
