A20
EXAMPLE 2 (Cooking program with steam cycle)
-For menu #2, we will program it so that we have a steam injection of 20 seconds, a cooking time of
20 minutes at 375
°
F followed by a 15 seconds buzzer.
To access the programming mode:
•
Press both arrows simultaneously for 5 seconds. Both lights light up to show that the
programming mode is working.
•
Select the menu number (Ex. #2)
Step #1
Suggested values
SP1 appears.
Use the arrows to adjust to the desired temperature
(375°F)
Press on the number of the menu to confirm
(ex. # 2)
t1 appears
Use the arrows to select the desired timing
(00:20)
Press on the number of the menu to confirm
(ex. # 2)
E1 appears
Use the arrows to select the appropriate code
(0001 for the steam)
Press on the number of the menu to confirm
(ex. # 2)
Step #2
Suggested values
SP2 appears.
Use the arrows to adjust to the desired temperature
(375°F)
Press on the number of the menu to confirm
(ex. # 2)
t2 appears
Use the arrows to select the desired timing
(20:00)
Press on the number of the menu to confirm
(ex. # 2)
E2 appears
Use the arrows to select the appropriate code
(0000 for no event)
Press on the number of the menu to confirm
(ex. # 2)
Summary of Contents for JA10G
