Manual Code 2600201
DOMIX45 – Rev.06 - 02.09.2014
15/32
7.3.
RECIPES SETTING
Set the program number (ex.
P01
,
P02
etc.) appearing on the lower display (10) (
PROG.
led lights up) and then the desired water quantity, appearing on the upper display (8).
To store also the temperature, press the key and then proceed as for manual
operation.
Warning: recipe numbers from 1 to 9 must always be set using the format: 01, 02, etc.
It is possible to exit from a recipe setting dosing the recipe itself (press
[START]
), setting a
new recipe (press XX), or automatically after 6 seconds:
in all these cases the recipe is
stored
.
ATTENTION: the setting of the temperature in the model Domix45 (referred to in this
manual) has only the purpose of storage. It has no influence on the regulation and on the
by-pass operation. It must be performed manually by acting on the ball valve (14).
7.4.
RECIPES DOSING
To recall a recipe, enter the desired number (for example
P28
), which is shown for 3
seconds on the lower display (10), while the upper displays show the relevant quantity and
temperature. Press
[START]
to carry out the dosing. If modifications are required, set the
new quantity and/or temperature as explained above.
To stop water delivery manually at any time press the
[STOP/C]
key. After that on the
display (8) the delivered water quantity flashes; to resume dosing press again the
[START]
key, otherwise, pressing the
[STOP/C]
key, the quantity is cleared and it is possible to set a
new quantity.
7.5.
SPECIAL FUNCTIONS
Recipes memory viewer
Pressing for 3 seconds the key, the device shows the succession of the recipes stored in
memory (
PROG.
led is flashing in this phase). At the end of the sequence (or by pressing
[STOP/C]
any time) the machine comes to the normal function.
Free batch
It is possible to perform a special recipe controlling only the temperature, by means of the
special program
[P99]
.
On the upper display appears
[FrEE],
the central display shows the water temperature
while the bottom shows the external temperature.
With the
[START]
and
[STOP/C]
keys the solenoid-valve opens and closes.
To exit, digit a new recipe or
[P00].
This function may be useful also in case of a liter-counter failure.
