12
solar controller
The controller let’s you monitor solar panel and battery conditions.
No adjustments to controller are needed during installation.
Solar Controller is supplied pre-wired. Cables include connectors to plug the motor and
solar panel to the controller.
MOTOR
(pre-wired to
controller)
PANEL
(pre-wired to
controller)
BATTERY
(pre-wired to
controller)
-
+
+ -
+
-
BATTERY
LOAD
CHARGE
ON/OFF
Off: No Charge
On: Charging
Flash: Faulty Panel
Voltage normal
Under voltage
Overcharge
Off: Current
overload
On: correct
output
voltage
Slow Flash:
Over current
(momentary)
Fast Flash:
Short circuit
No power at motor?
•
Check fuse and connections
• If short-circuited or overloaded, press on/off button and wait 30 seconds.
•
Check individual battery voltage with
multimeter. If under 11.1v, remove batteries and recharge using 12v car battery charger.
TROUBLE SHOOTING
