Dovre Vintage 30, Installation Instructions And Operating Manual

Page: 41 / 158

4. Place the latch button into the latch retainer, see
figure.
Preparing the connection to
chimney
When connecting the appliance to a chimney, you can
choose the
top or rear of the appliance.
When the appliance is delivered, the
connection on the rear is left open.
Plug the outlet that you don't want to use with the
corresponding cover that was supplied.
Install the corresponding connection collar that
was supplied on the outlet that you want to use.
Sealant and materials are supplied.
Connecting to the rear
1. Apply supplied fibre glass sealing tape of 10x3mm
to the contact surface of the connection collar.
2. Install the connection collar to the back wall with
the materials.
Connect to top
1. Remove the top plate.
The top plate can be taken off the appliance
just like that.
2. Remove the decorative cover (12) from the top
plate.
3. Remove the cover (10) from the inner top plate.
4. Apply sealing tape measuring 10 x 3mm to the
contact surface of the connection collar.
5. Install the connection collar to the inner top plate
with the materials.
Installation
Subject to change because of technical improvements
9