Dovre 300CB, Installation Instructions And Operating Manual

Page: 31 / 88

4. Close the appliance door and completely open the
air slider in the door.
5. Allow the fire develop into a good blaze until there
is glowing bed of charcoal. You can then add fuel
and adjust the appliance, see the chapter "Stoking
with wood".
Burning wood
After you have followed the instructions for lighting :
1. Slowly open the stove door.
2. Spread the charcoal evenly across the bottom of
the stove base.
3. Stack a few logs on the charcoal.
Open stacking
If the logs are stacked openly, the wood will burn
quickly as the oxygen can reach each log easily. If
you want to use the stove for a short while, make an
open stack.
Compact stacking
If the logs are stacked tightly, the wood will burn more
slowly as the oxygen can only reach some logs
easily. If you want to burn wood for a longer period,
make a compact stack.
4. Close the door of the appliance.
5. Control the fire with the air slider in the door.
Fill the appliance half-way at most.
Controlling combustion air
The appliance has various features for air control; see
following figure.
1
2
09-20020-169
The main air vent (1) regulates the fire.
Subject to change because of technical improvements
9