WIL-11100-E-05
13
WILDEN PUMP & ENGINEERING, LLC
P E R F O R M A N C E
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specifi ed so that daily operation
parameters will fall in the center of the pump performance curve.
PV400 STAINLESS STEEL
ULTRA-FLEX™-FITTED
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specifi ed so that daily operation
parameters will fall in the center of the pump performance curve.
PV400 STAINLESS STEEL
PTFE-FITTED
Height .................................528 mm (20.8")
Width .................................. 384 mm (15.1")
Depth .................................. 310 mm (12.2")
Est. Ship Weight ..........................................
316 Stainless Steel 43 kg (94 lbs)
Alloy C 45 kg (100 lbs)
Air Inlet ...................................19 mm (3/4")
Inlet ......................................38 mm (1-1/2")
Outlet ...................................38 mm (1-1/2")
Suction Lift ......................4.7 m Dry (15.3')
9.5 m Wet (31.2')
Displacement/Stroke ...... 0.61 l (0.16 gal.)
1
Max. Flow Rate ..............299 lpm (79 gpm)
Max. Size Solids .................4.8 mm (3/16")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2.1 bar (30 psig) head pressure.
Example:
To pump 64 lpm (17 gpm)
against a discharge pressure head of
2.1 bar (30 psig) requires 2.8 bar
(40 psig) and 34 Nm
3
/h (20 scfm) air
consumption.
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Height .................................528 mm (20.8")
Width .................................. 384 mm (15.1")
Depth .................................. 310 mm (12.2")
Est. Ship Weight ..........................................
316 Stainless Steel 43 kg (94 lbs)
Alloy C 45 kg (100 lbs)
Air Inlet ...................................19 mm (3/4")
Inlet ......................................38 mm (1-1/2")
Outlet ...................................38 mm (1-1/2")
Suction Lift ..................... 6.3 m Dry (20.5')
9.5 m Wet (31.2')
Displacement/Stroke ......0.76 l (0.20 gal.)
1
Max. Flow Rate ............. 303 lpm (80 gpm)
Max. Size Solids .................4.8 mm (3/16")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2.1 bar (30 psig) head pressure.
Example:
To pump 121 lpm (32 gpm)
against a discharge pressure head of
4.1 bar (60 psig) requires 2.8 bar
(40 psig) and 68 Nm
3
/h (40 scfm) air
consumption.
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
