Dover TWG TULSA RUFNEK 60, Service Manual

Page: 14 / 30

14
40-8
40-6
40-7
40-2
40-6
40-8
40-3
40-4
40-5
40-9
40-1
GENERAL ASSEMBLY
H. OUTPUT PLANET SET ASSEMBLY
1. Insert the snap ring (40-9) and the thrust
plate (40-5) into the carrier (40-2) along with
the gears (40-2), bearings (40-6), spacers
(40-7), and thrust washers (40-8).
2. Being careful to line up the thrust washers
(40-8) and bearings (40-6) with the planet
pins (40-3), press the pins into the carrier.
3. Replace the retaining rings (40-4).
If the pins are not lined up
properly, the thrust washer
can be shattered during the
pressing operation.