WIL-10252-E-01
Wilden
®
8
PERFORMANCE
T15 METAL
RUBBER-FITTED
Height ............................ 810 mm (31.9")
Width ............................. 432 mm (17.0")
Depth ............................. 279 mm (11.0")
Est. Ship Weight . Aluminum 53 kg (116 lbs)
Cast Iron 91 kg (200 lbs)
316 Stainless Steel 79 kg (175 lbs)
Air Inlet.................................. 19 mm (3/4")
Inlet ....................................... 76 mm (3")
Outlet ...................................... 76 mm (3")
Suction Lift ...................... 5.5 m Dry (18')
9.45 m Wet (31')
Disp. Per Stroke
1
...................5.3 l (1.40 gal.)
Max. Flow Rate .......... 878 lpm (232 gpm)
Max. Size Solids .................... 10 mm (3/8")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure
against a 2 bar (30 psig) head pressure.
Example:
To pump 530 lpm (140 gpm)
against a discharge pressure head of
2.1 bar (30 psig) requires 4.1 bar (60 psig)
and 136 Nm3/h (80 scfm) air consumption.
(See dot on chart.)
Caution: Do not exceed 8.6 bar (125 psig)
air supply pressure.
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump performance curve.
T15
METAL
TPE-FITTED
Height ............................ 810 mm (31.9")
Width ............................. 432 mm (17.0")
Depth ............................. 279 mm (11.0")
Est. Ship Weight . Aluminum 53 kg (116 lbs)
Cast Iron 91 kg (200 lbs)
316 Stainless Steel 79 kg (175 lbs)
Air Inlet.................................. 19 mm (3/4")
Inlet ....................................... 76 mm (3")
Outlet ...................................... 76 mm (3")
Suction Lift .................... 3.49 m Dry (13')
8.53 m Wet (28')
Disp. Per Stroke
1
.................. 5.4 l (1.43 gal.)
Max. Flow Rate .......... 845 lpm (223 gpm)
Max. Size Solids .................... 10 mm (3/8")
1
Displacement per stroke was calculated
at 4.8 bar (70 psig) air inlet pressure against
a 2 bar (30 psig) head pressure.
Example:
To pump 492 lpm (130 gpm)
against a discharge pressure head of
2.1 bar (30 psig) requires 4.1 bar (60 psig)
and 119 Nm
3
/h (70 scfm) air consumption.
(See dot on chart.)
Caution:) Do not exceed 8.6 bar (125 psig)
air supply pressure.
Section 5
Flow rates indicated on chart were determined by pumping water.
For optimum life and performance, pumps should be specified so that daily
operation parameters will fall in the center of the pump performance curve.
