ALF-13060-E-01
All-Flo
15
STEP 7
Remove the “Air Valve Spool” from
the main “Air-Valve Assembly”.
Note: The shorter piston is to be
on the plug side.
STEP 8
Using the pick, remove the “Lip
Seal (Air Valve)” from the main
“Air-Valve Assembly”.
STEP 9
Using the pick, remove the
second “Lip Seal (Air Valve)” from
the main “Air-Valve Assembly”.
AIR VALVE ASSEMBLY
To assemble the air valve, reverse the order of disassembly. During
assembly, ensure that the open side of the lip-seals are both facing each
other inward. Install the shuttle plate with the smooth/shiny side toward
the shuttle car. Lubrication of the air valve assembly, with a non-synthet-
ic lubricant, is recommended. Magna-Lube or Magna-Plate are recom-
mended for assembly lubrication (see detailed parts list for ordering
information).
Note that if the lip-seals are installed incorrectly, they will be unable to
rotate. Insert the spool, the spool’s shorter piston is to be on the plug
side, ensure O-ring is enstalled, and then the air-valve end plug into
position.
