manualshive.com logo in svg

Dover Markem Imaje SmartDate X60, User Manual

Share
Download
Dover Markem Imaje SmartDate X60 User Manual Download Page 196

Diagnostics

197

10056272-AA

Zooming in on individual prints.

 

In some cases, it may be necessary to zoom in and examine a single print in more 
detail. This can be achieved by pressing button 2. When pressed, the screen will zoom 
in on the leading edge of each print signal in turn. When focussed on the final print go 
signal, pressing the button will cause the screen to zoom back out to display the entire 
profile.

Re-recording a profile. 

If you want to record a new profile, press button 1.  A please wait..  message will 
appear to indicate the printer is actively capturing information. Once all the information 
is available to display the graph, the screen will automatically refresh. If you want to 
cancel this action, simply press the same button.

Copying the profile to USB stick. 

If you wish to copy the speed profile to a log file, press button 3.  This will save the 
profile in as a comma-separated value file which can be opened in (eg) Microsoft Excel.

for parts & service call QLC (800) 837-1309

Summary of Contents for Markem Imaje SmartDate X60


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands