manualshive.com logo in svg

Dover Markem Imaje SmartDate X60, User Manual

Share
Download
Dover Markem Imaje SmartDate X60 User Manual Download Page 178

Printer configuration

179

10056272-AA

 

Files

The Files menus allow you to organise your file structure.
The following File options can be can accessed:

State

Description

Copy Files

Copy files to or from a USB memory stick.

Delete Files

Delete specific files from the job database.

Clear Job Database

Delete all files from the job database.

File Statistics

View information about the files.

Copy Logs to USB

Copy Log files to a USB memory stick.

 

Service

The Service menus allow you to configure various options for your SmartDate.
The following File options can be can accessed:

State

Description

Setup Wizard

This will help guide you through the basic configuration for 
your printer.

Installation Setup

Configure the printhead resistance setting. 

Restore to Factory

Re-configure the machine back to the factory default 
settings.

Upgrade from USB

This allows you to upload the latest version of firmware for 
your printer.

Suppress Warnings

This allows you select any warnings that you do not want to 
be displayed.

for parts & service call QLC (800) 837-1309

Summary of Contents for Markem Imaje SmartDate X60


























































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands