manualshive.com logo in svg

Dover markem-imaje SmartDate 5, Maintenance Manual

Share
Download
Dover markem-imaje SmartDate 5 Maintenance Manual Download Page 188

SECTION 5 - TROUBLESHOOTING

5-42

SmartDate 5

  

06/08

5.16.2

Recovery Using CoLOS Control

Job Files

If your SmartDate 5 is linked to CoLOS Control via an Ethernet (multi-link) you can 
re-download all your Jobs by selecting the previously designed images and 
sending them to the required SmartDate 5. See your CoLOS Control help files for 
details on how to select and download Jobs.

Settings Files

If your SmartDate 5 is linked to CoLOS Control via an Ethernet or RS-485 (multi-
link) you can upload all the printer settings from the SmartDate 5 and save it as a 
file on your PC. This file can also be printed out as a reference. To keep a record 
of your printer settings follow the steps below, using CoLOS Control:

•

Enter CoLOS Control, and go into Supervisor Mode

•

Select CoLOS Control, My Devices and select the required Device.

•

Select Device Settings, the last recorded settings file details is displayed.     

•

Select Upload Settings to refresh the details.

•

Select Save Settings, name the file and save the *.settings file to an 

appropriate place on your PC. 

•

This file can then be attached to a Job file or used to re-install your specific 

printer setting to your SmartDate 5.

•

To download the settings file to the SmartDate 5 or a different SmartDate 5 

select the Download Settings option for the appropriate Device.

5.16.3

Recovery using the PC Tools Application

The PC Tools application is provided on the CD which comes with your 
SmartDate 5. This can be used to upload / download Job detail information and 
Printer settings information to your machine.

5.16.4

Recovery using Compact Flash

This option is limited in that it does not allow you to upload information to a PC. 
The card is used as a replacement for the local database. Machine printer 
settings, database information and other machine specific details are stored on 
the card.

If your SmartDate 5 stops functioning for any reason, the card can be removed 
and inserted into a replacement machine.

All of the information stored on the card will be transferred to the replacement 
SmartDate 5.

Summary of Contents for markem-imaje SmartDate 5







































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands