23
2. Use your fingers to unhook the rib out of it's slot on
the back side, press it down about 1 cm. (1)
Unhook the front by pressing out the walls around the
outlets. (2)
3. Once both back and front is unhooked you can simply
pull the cover straight up until it's removed.
4. Remove the outlets tube from their positions by
pulling them straight up.
Place all loose parts in the flush bin with water and
clean with a brush.
5. After you have cleaned all parts, reassemble the
mixing tray in reverse order. Start by placing back the
outlet tubes to their mixer chambers.
