Douglas WIR-3110, User Manual

Page: 6 / 10

Douglas Lighting Controls Page 6 August 25, 2015
www.DouglasLightingControls.com Tech Support: 1-877-873-2797
2.5. Switch Setting Menu 1
Use this menu to configure dual pole sensors as multi-level lighting (sequencing)
sensors.
1) Sequences (2-Pole):
Once configured using WIR-3110 with
each press of the override button the
Di
versa sensor steps through the
sequence, as per table below:
00 = Both poles off (START)
10 = Primary pole off, secondary pole
on
11 = Both poles on
01 = Primary pole on, secondary pole
off
RPT = Repeat
Start 1
st
Press
2
nd
Press
3
rd
Press
4
th
Press
00 01 10 11 00
00 10 11 00 10
00 01 11 00 01
00 11 00 11 00
00 01 00 01 00
00 00 00 00 00
The first level is activated by the
occupancy signal or switch if it is
set to vacancy.
2) Alternating Primary (2-Pole):
When enabled, the primary pole will
alternate for even lamp wear, every
time occupancy is detected (does
not apply to override button).
3) Disable Mode
The sensor can be disabled by
applying 24VAC from the source on
the Sensor Link wire. This option is
to determine what action is to be
performed.
- OFF
- 10
- 01
- 11
-
– – (As-is)