DougMac.com
Belt Washer
10
6
To set the proper rotational speed, first slow down the washer head to the point where
sections of the belt are exiting the washer head having not been washed by the rotating
cleaning nozzles. Slowly increase the rotational speed until the entire belt surface is washed.
The spray path of the rotating nozzles should just barely overlap the path of the previous
rotation. The speed is now properly set. If you set the speed too slow, sections of the belt will
not be washed by the rotating head. If you set the speed too fast, the washer nozzles will not
clean the belt as effectively as they would when properly set.
6
Adjust the oil drip of the air line oiler using the green adjusting screw to 2-3 drips per minute.
Belt Washer Cyclone Controls
